Tim Wilson wrote: > I posted recently about putting my Vonage VoIP box inside my home network. I > decided to give the Motorola ATA a static IP so I could do port forwarding > if necessary from my IPCop firewall. Using the Motorola's Web built-in Web > interface I set the ATA's IP address to 192.168.1.75. Unfortunately, I set > the netmask to 255.255.0.0 instead of 255.255.255.0 which is how I've > configured the rest of my home network (192.168.1.0/24). > > I can no longer access the ATA's Web server and change the config. There is > no external "reset to factory defaults" button. You have to access the web > page to reset the unit. There's a "PC" port on the back of the unit that can > be used to interface with the ATA. Under normal circumstances, the ATA will > do DHCP/NAT and give out 192.168.102.100 as the first IP address. what does voyage tech support say? surely someone else has fat fingered a setting in the web config. there must be a way to reset it. -- scot _______________________________________________ TCLUG Mailing List - Minneapolis/St. Paul, Minnesota http://www.mn-linux.org tclug-list at mn-linux.org https://mailman.real-time.com/mailman/listinfo/tclug-list