Switch the order of drives in BIOS, swap the master/slave jumpers or swap the IDE ports for the cables. (I'm assuming it's IDE. If it's SCSI, change the boot order in the SCSI BIOS.) Then you'll have to mount each partition using the mount command. Something like this should work: mount /dev/hdb1 /mnt/oldetc ============================ Daniel Rysztak, CCNP http://www.druids-grove.net/ -----Original Message----- From: tclug-list-bounces at mn-linux.org [mailto:tclug-list-bounces at mn-linux.org]On Behalf Of Raymond Norton Sent: Friday, April 09, 2004 12:56 PM To: tclug-list at mn-linux.org Subject: [TCLUG] mounting linux drive I had a motherboard die on a server and need to mount the drive on a working box. Whenever I add it in to the working box it will boot instead of the drive that is supposed to. Any idea what I have to do get a proper boot up ? I know it is seeing the label and that is causing the problem, but not sure what can be done about it. Raymond _______________________________________________ TCLUG Mailing List - Minneapolis/St. Paul, Minnesota http://www.mn-linux.org tclug-list at mn-linux.org https://mailman.real-time.com/mailman/listinfo/tclug-list _______________________________________________ TCLUG Mailing List - Minneapolis/St. Paul, Minnesota http://www.mn-linux.org tclug-list at mn-linux.org https://mailman.real-time.com/mailman/listinfo/tclug-list