Possible that memory is fragged enough (or something) that it can still route packets, but not telnet? Have you reset it? If you reset it and still can't get in, you'll have to dig out the serial cable to see what the problem is. Then it's check that passwords are set, telnet is enabled, etc. You might even try enabling the web port temporarily to see if you can get that to work (if telnet still isn't) On Mon, 2003-10-27 at 15:00, David Dyer-Bennet wrote: > Adam Maloney <adamm at sihope.com> writes: > > > I think it won't allow telnet if there's no exec password set. But IIRC > > you would get some sort of message about that (but maybe not with your > > version of code?) > > Both passwords are set (or at least were long ago). (And I was able > to telnet to it at some long-ago time; i.e. the last time I had > occasion to try.) _______________________________________________ TCLUG Mailing List - Minneapolis/St. Paul, Minnesota http://www.mn-linux.org tclug-list at mn-linux.org https://mailman.real-time.com/mailman/listinfo/tclug-list