# umount /boot # mount -o rw /dev/hda1 /boot Tom Veldhouse ----- Original Message ----- From: "Kent Schumacher" <kent at structural-wood.com> To: "TCLUG Mailing List" <tclug-list at mn-linux.org> Sent: Monday, November 17, 2003 11:53 AM Subject: [TCLUG] Knoppix advice > Hi, > > I just upgraded a redhat system through apt-get on a lilo system and forgot > to 're-lilo' the system. The system has hung on booting. > > Typically what I've done in the past is boot off the redhat install CD into > emergency mode, chroot to my root partition, mount /boot, and enter lilo. > > I'm following this groups advice to try knoppix (which is truly an amazing > thing). > > After knoppix boots, I open a konsole, chroot to my root partion on the > hard drive, and then try to mount /boot. > > I get this error: > > mount: block device /dev/sda6 is write-protected, mounting read only. > mount: cannot mount block device /dev/sda6 read-only. > > This is stirring a memory, but things aren't gelling - anybody have any > specific help? > > Thanks, > kent > > > > _______________________________________________ > TCLUG Mailing List - Minneapolis/St. Paul, Minnesota > http://www.mn-linux.org tclug-list at mn-linux.org > https://mailman.real-time.com/mailman/listinfo/tclug-list > > _______________________________________________ TCLUG Mailing List - Minneapolis/St. Paul, Minnesota http://www.mn-linux.org tclug-list at mn-linux.org https://mailman.real-time.com/mailman/listinfo/tclug-list