Tuesday, July 1, 2003 @ 9:21:17 PM Central Standard Time Hello, and a good evening to you all. I have a box that has been running slack 8.1 for awhile now. When I did the install (many moons ago) I fdisked my drives like a man, and setup the partitions I wanted. All Good. While going through the install I setup/formatted all the partitions using the stock install program. Here is a copy of the fstab the install produced: /dev/sda1 swap swap defaults 0 0 /dev/hdd1 / ext3 defaults 1 1 /dev/sda2 /home ext3 defaults 1 2 /dev/sda3 /var ext3 defaults 1 2 /dev/hdd2 /var ext3 defaults 1 2 /dev/hdd3 /home ext3 defaults 1 2 /dev/hda1 /boot ext3 defaults 1 2 /dev/hda2 /root ext3 defaults 1 2 /dev/hdb1 /home ext3 defaults 1 2 /dev/cdrom /mnt/cdrom iso9660 noauto,owner,ro 0 0 /dev/fd0 /mnt/floppy auto noauto,owner 0 0 none /dev/pts devpts gid=5,mode=620 0 0 none /proc proc defaults 0 0 I am concerned something is incorrect. Here is what happens when I do a df -m Filesystem 1M-blocks Used Available Use% Mounted on /dev/hdd1 6297 925 5047 16% / /dev/sda2 18494 1600 15939 10% /home /dev/sda3 3875 1100 2575 30% /var /dev/hdd2 3875 1100 2575 30% /var /dev/hdd3 18494 1600 15939 10% /home /dev/hda1 99 7 87 8% /boot /dev/hda2 2902 76 2677 3% /root /dev/hdb1 18494 1600 15939 10% /home The /var's & the /homes's are showing up identicle. Do I need to remove some of the entries in the fstab file, and mount the drive partitions some otherway?? Any sugestions would be great. Many Thanks, Robert (aka B_o_B) David Felix De Mars West Longitude 90' 15' 43" http://b-o-b.homelinux.com mailto:chewbaka at toughguy.net _______________________________________________ TCLUG Mailing List - Minneapolis/St. Paul, Minnesota http://www.mn-linux.org tclug-list at mn-linux.org https://mailman.real-time.com/mailman/listinfo/tclug-list