I just received this from D-LINK as I was having trouble getting my card to
work also. Hope this helps.
LarryC
D-Link Reference ID: TSE10205-125334
(This is NOT an RMA number. It is for e-mail response tracking
purposes only.)
Dear Valued Customer,
Here is a list of the most common D-Link Adapters for which Linux has
drivers developed.
Adapter Drivers in Linux
D-Link Adapter Linux Module Module Location
__________________________________________________________________________
Desktop Adapters *.*.**-** = Kernel version (ie:
2.2.12-20)
DE-220 ne.o lib/modules/*.*.**/net
DE-528ct ne2k-pci.o lib/modules/*.*.**/net
DFE-500tx tulip.o lib/modules/*.*.**/net
DFE-530tx via-rhine.o lib/modules/*.*.**/net
DFE-530tx+ rtl8139.o lib/modules/*.*.**/net
DFE-538tx rtl8139.o lib/modules/*.*.**/net
DFE-540tx tulip.o lib/modules/*.*.**/net
__________________________________________________________________________
Portable Adapters
*.*.**-** = Kernel version (ie: 2.2.12-20)
DE-650 pcnet_cs.o lib/modules/*.*.**/pcmcia
DFE-650 pcnet_cs.o lib/modules/*.*.**/pcmcia
DFE-650tx pcmcia_cs.o lib/modules/*.*.**/pcmcia
DFE-660tx tulip_cb.o lib/modules/*.*.**/pcmcia
Note:
(1)These modules are found on most newer distributions of Linux.
(2) Most PCMCIA drivers are found in pcmcia_cs 3.1.24 which can be
found at: http://sourceforge.net/project/showfiles.php?group_id=2405
Thank you for your technical question and feedback. If you are
continuing to have problems please contact our live support at
949-790-5290.or resubmit the problem at
http://www.dlink.com/tech/contact/.
Thank You,
D-Link US Technical Support
949-790-5290
Note: D-Link receives a large volume of e-mail each day so please
include ALL previous e-mail exchanges with D-Link Technical Support
when sending replies. Thank you.
To: ustech at dlink.com
From: c15018 at nwa.com
cc:
bcc:
Subject: D-LINK DE-220PCT & RedHat Linux 7.0
Assigned: Hieu N.
I'm having trouble getting the D-LINK DE-220PCT to initialize. I've got
a dual boot system: WINNT and RedHat Linux 7.0. In WINNT the card is
set to IO=240 and IRQ=11 plug&play disabled and it works fine. In Linux
I have in /etc/modules.conf...
alias eth0 nec2k-pci
nec2k-pci io=240 irq=11
Upon booting in Linux I get insmod eth0 initialization failed. What
needs to be done to fix this??
Thanks
LarryC
Larry.Cable at nwa.com
>Message: 6
>Date: Sun, 04 Feb 2001 19:19:33 -0600
>From: "d.j. callais" <djx at mediaone.net>
>To: TCLUG <tclug-list at mn-linux.org>
>Subject: [TCLUG] D-Link Cards
>Reply-To: tclug-list at mn-linux.org
>
>Does anyone have any experience installing the D-Link DFE 530TX+ network
>card? I am running RH 7.0 and trying to use the recommended driver
>rtl8139 and having no luck at all.
>
>
>Thanks
>D.J.
>
>