You might want to check the ip address of all the boxes. micronazi is particular to certain subnets and host addresses. Try and keep everything either in the 10.0.0.x or 192.168.x.x range. For a subnet you usually can get away with the defaults as long as your host addresses are the same. micronazi uses a default of 2555.0.0.0 and lunices use 255.255.255.0 so check that also. Probably the first place to look however is the device manager. Make sure you card is installed into the micronazi matrix first. Also check your lights on the NIC's themselves. Don't forget to double check you cables also. Make sure you hub or router is not blocking ip's or failing.(make sure it's on). If none of that works then.............kick it.......... -Spencer