I think we all are. Someone complained about this yesterday, too. Time to
unsubscribe that address!


On Sat, 22 Jul 2000, Kozmik Krash wrote:

> im getting it
> :P
> 
> > Is anyone else getting these everytime they post?
> > 
> > 
> > ----- Forwarded message from mailer-departed-
> employee at gone.sgi.com -----
> > 
> > From: mailer-departed-employee at gone.sgi.com
> > Message-Id: <200007221653.SAA950766 at gone.sgi.com>
> > Date: Sat, 22 Jul 2000 18:53:38 +0200 (CEST)
> > To: Ben Lutgens <blutgens at usinternet.com>
> > Subject: Returned Mail: Recipient no longer with company
> > 
> > 
> > The attached message was sent to 'Edward Hayes-Hall'
> > at Silicon Graphics who left the company around 14-JUL-00.
> > We are returning it to you UNDELIVERED.
> > 
> > 
> > The message was probably addressed to 'ehh at sgi.com'.
> > 
> > If the subject of this message is related to SGI 
> business, please
> > use one of the SGI contact addresses listed below (if 
> any) or as
> > a last resort, email helpdesk at corp.sgi.com or call +1 650-
> 960-1980 to
> > help determine the correct person to receive it.
> > 
> > You may also try contacting their manager:
> > 	Bill Cullen, bjc at sgi.com
> > 
> > 
> > We do not know of any external contact information for 
> this person.
> > 
> > 
> > Sincerely,
> > 
> > helpdesk at corp.sgi.com
> > 
> > From: Ben Lutgens <blutgens at usinternet.com>
> > Message-ID: <20000722115218.A28943 at localhost>
> > In-Reply-To: <00072211080900.05850 at Dingo>; from 
> mike at getbent.net on Sat, Jul 22, 2000 at 11:08:09AM -0500
> > Date: Sat, 22 Jul 2000 11:52:18 -0500
> > Reply-To: tclug-list at mn-linux.org
> > To: tclug-list at mn-linux.org
> > Subject: Re: [TCLUG:19758] Configuring 675 modem
> > X-Mailer: No good GUI Email clients for x yet
> > User-Agent: Mutt/1.2i
> > 
> > Not to insult your intelligence, but did you hit enter a 
> few times after the
> > reboot? that should cause the login prompt to pop up.
> > 
> > 
> > On Sat, Jul 22, 2000 at 11:08:09AM -0500, Mike Nielsen 
> wrote:
> > >On Wed, 31 Dec 1969, you wrote:
> > >
> > >can you ping the 675?   The 675 defaults to a 10.0.0.1 
> ip addres
> > >on eth0.  If your machine doesn't fall into that subnet 
> you won't be
> > >able to telnet to it.
> > >
> > >You should be able to connect with Hyperterminal.....
> > >I have run across several a 675 that has Telnet disabled
> > >until you set an exec password.   
> > >
> > >set hyperterm to run at 3840  8 N 1  No flow control...
> > >
> > >
> > >
> > >
> > >If you find that your Cbos has been corrupted you need 
> to reinstall it.
> > >
> > >The following is taken from Cisco on how to do this.  Be 
> warned if you screw 
> > >this up...  Well you know.
> > >
> > >BTW, if you need the CBOS 2.2 firmware let me know and 
> I'll send it to you.
> > >
> > >----------
> > >Hey there, is it possible to add this stuff to the next 
> X-ray or tools CD.
> > >
> > >Cisco 675 CBOS 2.2 update and directions
> > >
> > >
> > >  Upgrading your Cisco 675 External Modem to the latest 
> software release 
> > >involves
> > >  the following four processes:
> > >
> > >    1.Downloading the latest Cisco 675 External Modem 
> operating system
> > >      (version 2.2) to your hard drive. 
> > >    2.Downloading the Commander software (version 1.2) 
> to your hard drive. 
> > >    3.Upgrading your existing Cisco 675 External Modem 
> operating system to
> > >      the new version 2.2 that you will have downloaded 
> to your hard drive. 
> > >    4.Installing the Commander software (version 1.2). 
> > >
> > >
> > >
> > >      You may want to print these instructions at this 
> point so that you can
> > >      easily refer to them as you are going through the 
> Cisco 675 External
> > >      Modem download processes. If you do not have a 
> printer, you may
> > >      save these instructions as a Word file and then 
> open them on your
> > >      desktop so that you can follow along as you 
> complete the processes.
> > >
> > >
> > >
> > >  Process 1 - Downloading the Cisco 675 External Modem 
> operating system
> > >  (version 2.2) to your hard drive:
> > >
> > >      Create a folder on your hard drive. (The root 
> directory is recommended 
> > >for
> > >      convenience). 
> > >      Select the hyperlink named "675 2.2 CBOS Code" and 
> save it to your new
> > >      folder located on your hard drive. This file is 
> Winzip compressed. Use
> > >      Winzip or Aladdin Expander to decompress the file. 
> If you need Aladdin
> > >      Expander you can download it free here or if you 
> need Winzip you can
> > >      download a trial copy here. 
> > >
> > >  Process 2 - Downloading Commander v1.2 to your hard 
> drive:
> > >
> > >  Commander v1.2 software is required and will offer you 
> the following:
> > >
> > >      The ability to reset passwords that better protect 
> the security of your 
> > >Cisco
> > >      675 External Modem. 
> > >      Statistical output that indicates performance on 
> your Cisco 675 External
> > >      Modem. 
> > >      Management information on your Cisco 675 External 
> Modem. 
> > >
> > >  In order to download the Commander v1.2 software, 
> please complete the
> > >  following: 
> > >
> > >      Create a folder on your hard drive. (The root 
> directory is recommended 
> > >for
> > >      convenience). 
> > >      Select the hyperlink named "675 Commander 1.2 for 
> Windows® " and
> > >      save it to your new folder located on your hard 
> drive. This file is 
> > >Winzip
> > >      compressed. Use Winzip or Aladdin Expander to 
> decompress the file. If
> > >      you need Aladdin Expander you can download it free 
> here or if you need
> > >      Winzip you can download a trial copy here. 
> > >
> > >  Process 3 - Upgrading your existing Cisco 675 External 
> Modem operating
> > >  system to version 2.2: 
> > >
> > >      Ensure that your PC, Ethernet Card and Cisco 675 
> External Modem are
> > >      connected, configured and operational. This should 
> be apparent if you're
> > >      currently using MegaBit Services. 
> > >      Ensure that the serial cable is installed between 
> the PCs COM Port
> > >      (DB-9) and the Cisco 675s MGMT Port (RJ-45). If 
> you are unsure,
> > >      please consult your MegaBit Services User Guide. 
> The serial cable
> > >      facilitates upgrading the Cisco 675 External Modem 
> operating system. 
> > >      Note to which PC COM Port that the serial cable is 
> installed. You will 
> > >need
> > >      this information for the next step. 
> > >
> > >  Configure HyperTerminal
> > >
> > >  The following step assumes that you have not created a 
> session icon for
> > >  HyperTerminal and the Cisco 675 External Modem.
> > >
> > >      Navigate to the HyperTerminal application. 
> > >
> > >  If you are a Windows® 98 user, you may have to install 
> HyperTerminal from 
> > >your
> > >  Windows® 98 compact disc. If Hyperterminal is not 
> working properly, for
> > >  example, if you are receiving an "illegal operation" 
> message, please go to 
> > >the
> > >  following website and upgrade your existing 
> Hyperterminal application:
> > >  http://www.hilgraeve.com/
> > >
> > >      Select and name an icon for the Cisco 675 External 
> Modem. 
> > >      In the "Connect using" box select the appropriate 
> COM Port that the 
> > >serial
> > >      cable is installed. 
> > >      In the "Properties" window, ensure these port 
> settings:
> > >
> > >         Bits per second: 38400 
> > >         Data bits: 8 
> > >         Parity: None 
> > >         Stop bits: 1 
> > >         Flow control: None
> > >
> > >      Click OK and press [Enter]. 
> > >
> > >      A HyperTerminal Session window appears with a 
> welcome message and
> > >      a password prompt.
> > >
> > >      Hello!
> > >
> > >      CBOS v2.1
> > >
> > >      User Access Verification
> > >
> > >      Password:
> > >
> > >
> > >      If you don't see this information, press [ENTER] a 
> few times. 
> > >      If you still don't see the welcome message, verify 
> connections and power
> > >      to your modem. 
> > >      If you just see "cbos>", that is OK. 
> > >      You don't need a password to configure the modem. 
> > >      At the password prompt press [ENTER]. 
> > >
> > >  Updating the Modem Operating System
> > >
> > >  The following step requires your modem to be in 
> the "enable" mode. This mode
> > >  allows changes in configuration.
> > >
> > >      At the cbos> prompt, type: enable and press 
> [ENTER]. 
> > >      At the password prompt press [ENTER]. 
> > >
> > >      The enable mode ships default from Cisco System 
> without an enable mode
> > >      password. If you have previously programmed an 
> enable mode password,
> > >      enter that password now. 
> > >
> > >      The following should be displayed: 
> > >
> > >      cbos>enable
> > >
> > >      Password:
> > >
> > >      cbos#
> > >
> > >
> > >  The pound sign indicates that you are in the enable 
> mode.
> > >
> > >  Before continuing with the following steps, please 
> read the next few lines 
> > >of
> > >  directions up to the WARNING message below.
> > >
> > >      At the cbos# prompt, type: set download code then 
> press [ENTER]. 
> > >      The following should be displayed: 
> > >
> > >      cbos#set download code
> > >
> > >      Downloading
> > >
> > >      CCCCC
> > >
> > >
> > >      As the Cs are appearing, continue onto the next 
> step. 
> > >      On the HyperTerminal toolbar, select Transfer. 
> Select Send File. 
> > >      An additional Window pops up entitled "Send File". 
> Select Browse. 
> > >      You will be selecting the file that you downloaded 
> into a new folder. 
> > >      Select your hard drive and locate the folder and 
> file that you created 
> > >earlier.
> > >      Select the file nsrouter.c675.2.2.0.000.ima. 
> > >      In the Send File Window, Protocol field, ensure 
> that Xmodem is 
> > >selected. 
> > >      In the Send File Window, select the Send button. 
> > >
> > >  WARNING! It is extremely important that power is not 
> interrupted to your
> > >  equipment!
> > >
> > >      After transfer is complete (approximately 6 
> minutes), the new Cisco
> > >      software self extracts. You should allow the 
> automatic process to occur
> > >      and do not use your computer. 
> > >      At the password prompt, press [ENTER] 
> > >      At the cbos> prompt, type: show version 
> > >      The following should be displayed: 
> > >
> > >      Cisco Broadband Operating
> > >      System
> > >
> > >      CBOSTM 675 Software
> > >      (C675-I-M), Version v2.2
> > >
> > >      Copyright @ 1986-1999 by
> > >      cisco Systems, Inc.
> > >
> > >      Compiled Aug 24 1999
> > >      18:31:28
> > >
> > >      NVRAM image at 0x1032bfa0
> > >
> > >
> > >  Your Cisco 675 External Modem is now upgraded. 
> > >
> > >> I'm stumped:
> > >> >From Windows NT:
> > >>
> > >> I couldn't connect using Hyperterm, so I used 
> telnet,...
> > >> followed the instructions from visi (or thought I was),
> > >>
> > >> cbos>en
> > >> Password: [hit enter]
> > >> cbos#set nvram erase
> > >>    [warns that you have to write to make it effective]
> > >> cbos#write
> > >> cbos#rboot
> > >>  [and it hangs...]
> > >>
> > >> Now I cannot even connect with telnet!!!
> > >>
> > >> I'm stumped.  What's next?
> > >>
> > >> gs
> > >>
> > >>
> > >>
> > >>
> > >> -------------------------------------------------------
> --------------
> > >> To unsubscribe, e-mail: tclug-list-unsubscribe at mn-
> linux.org
> > >> For additional commands, e-mail: tclug-list-help at mn-
> linux.org
> > >
> > >---------------------------------------------------------
> ------------
> > >To unsubscribe, e-mail: tclug-list-unsubscribe at mn-
> linux.org
> > >For additional commands, e-mail: tclug-list-help at mn-
> linux.org
> > 
> > -- 
> > Ben Lutgens  Cell: 651.387.9065  Home: 651.703.9541
> > 
> > "I thought Christmas only comes once a year..."
> > James Bond - The World Is Not Enough
> > ----------------------------------------------------------
> ---------------------­
> > 
> > ----------------------------------------------------------
> -----------
> > To unsubscribe, e-mail: tclug-list-unsubscribe at mn-
> linux.org
> > For additional commands, e-mail: tclug-list-help at mn-
> linux.org
> > 
> > 
> > ----- End forwarded message -----
> > 
> > -- 
> > Ben Lutgens  Cell: 651.387.9065  Home: 651.703.9541
> > 
> > "I thought Christmas only comes once a year..."
> > James Bond - The World Is Not Enough
> > ----------------------------------------------------------
> ---------------------­
> > 
> > ----------------------------------------------------------
> -----------
> > To unsubscribe, e-mail: tclug-list-unsubscribe at mn-
> linux.org
> > For additional commands, e-mail: tclug-list-help at mn-
> linux.org
> > 
> > 
> 
> 
> 
> ---------------------------------------------------------------------
> To unsubscribe, e-mail: tclug-list-unsubscribe at mn-linux.org
> For additional commands, e-mail: tclug-list-help at mn-linux.org
> 


---------------------------------------------------------------------
To unsubscribe, e-mail: tclug-list-unsubscribe at mn-linux.org
For additional commands, e-mail: tclug-list-help at mn-linux.org