If you are using ppp then you should not even need a script visit www.usfamily.net/linux.html Its an old how to I wrote about two years ago but it should still give you all the right ideas. It should be even easyer to implement them in kppp. ----- Original Message ----- From: Zsolt Domokos <DomokosZ at esi.com> To: <tclug-list at mn-linux.org> Sent: Friday, July 07, 2000 9:35 AM Subject: [TCLUG:19486] pppd kppp connection problem > Hello all helpful out there, > > I have installed Mandrake 7.1 just recently. And I have been trying to set > up ppp to dial into my ISP without luck. The problem is the IP that the host > send to my machine is not the same that my machine captures. I can see the > IP sent by the host in the log window and when the script is done it > displays: you IP is 111.222.111.222 (example) and the IP in the kpppload > shown local IP is 111.222.111.2 > Looks like it can not capture the whole IP. > My kppp script is like: > Expect sername: > Send MyLoginName > Expect word: > Send MyPassword > Expect ver> > Send ppp > > Then I can see the sent IP. pppd starts, no connection. > Quite desperate. > > Thank all responds > Zsolt > > --------------------------------------------------------------------- > To unsubscribe, e-mail: tclug-list-unsubscribe at mn-linux.org > For additional commands, e-mail: tclug-list-help at mn-linux.org > ------ http://USFamily.Net/info - Unlimited Internet - $7.99/mo! ------ --------------------------------------------------------------------- To unsubscribe, e-mail: tclug-list-unsubscribe at mn-linux.org For additional commands, e-mail: tclug-list-help at mn-linux.org