Sweet!  I didn't even bother to try Reiser because the version of mkreiserfs
that I have won't let me adjust the block size, so I gave up since the
manual preaches about 2048B blocksize.

I just reformatted my disk with reiser and I'm running  bonnie on it to
compare it to ext2.  

ReiserFS:

              -------Sequential Output-------- ---Sequential Input--
--Random--
              -Per Char- --Block--- -Rewrite-- -Per Char- --Block---
--Seeks---
Machine    MB K/sec %CPU K/sec %CPU K/sec %CPU K/sec %CPU K/sec %CPU  /sec
%CPU
          100  6205 96.5 43356 93.6   453  1.1   877 12.5 28765 18.3 17443.3
95.9
          100  1744 26.7 47848 96.3   609  1.3  6820 96.2 91798 89.6  61.3
0.3
          100  6256 96.4 48244 95.6   432  0.8  6866 96.1 114530 94.0  72.2
0.4
          100  6114 95.5 47270 94.6   437  0.9  6861 96.3 117158 92.7  72.7
0.4


ext2:

              -------Sequential Output-------- ---Sequential Input--
--Random--
              -Per Char- --Block--- -Rewrite-- -Per Char- --Block---
--Seeks---
Machine    MB K/sec %CPU K/sec %CPU K/sec %CPU K/sec %CPU K/sec %CPU  /sec
%CPU
          100  6272 92.6 88213 91.3 47749 92.8  6820 96.2 154711 92.2 119.1
0.7
          100  6597 96.3 91556 94.8 50079 95.9  6854 96.5 160844 97.4 182.5
1.0
          100  6484 95.2 93161 96.4 49358 93.0  6872 96.5 154766 92.2 149.8
0.9
          100  6598 96.5 93746 95.2 51057 96.2  6798 96.0 156069 94.5 124.9
0.7



Looks like ext2 whooped Reiser.  I didn't add any special options to reiser.
I wonder if the reiserfs was 2048 byte blocks like the ext2 one if it would
make a difference.

Jay

> -----Original Message-----
> From: Scott Dier [mailto:dieman at ringworld.org]
> Sent: Tuesday, December 12, 2000 10:49 PM
> To: tclug-list at lists.real-time.com
> Subject: Re: [TCLUG] REAL Verbatim drive Q (:
> 
> 
> * Austad, Jay <austad at marketwatch.com> [001212 22:19]:
> > Can't use ReiserFS on it.  Reiser will only format with 
> 4096 byte blocks.  
> 
> /dev/scsi/host0/bus0/target4/lun0/disc on /mnt/mo type reiserfs
> (rw,noexec,nosuid,nodev,user=dieman)
> 
> /dev/scsi/host0/bus0/target4/lun0/disc
>                         620680    131428    489252  22% /mnt/mo
> 
> Worked fine here :)  I'm using a Tekram DC-315U card.
> 
> scsi0 : Tekram DC395U/UW/F DC315/U V1.32, 2000-12-02
> Vendor: OLYMPUS   Model: MOS364            Rev: 1.02
> Type:   Optical Device                     ANSI SCSI revision: 02
> Detected scsi removable disk sda at scsi0, channel 0, id 4, lun 0
> DC395x: Target 04:  Sync: 100ns Offset 15 (10.0 MB/s)
> SCSI device sda: 310352 2048-byte hdwr sectors (636 MB)
> 
> 
> -- 
> Scott Dier <dieman at ringworld.org> #linuxos at irc.openprojects.net
> http://www.ringworld.org/  finger:dieman at destiny.ringworld.org
> 
> "Kupo, kupkup, kupopo...  Po... Kupo!?  KUPOPO!!!
> 	<Chomp chomp> Kupooo."
> 		-Moguta (FFIX)
>