As long is you keep it nice and cool...... otherwise, it's "uh, oops!" (;^]) I still like nylon rod - - if you want grounding, use aluminum rod or a grounding wire. Good luck - Jon Brad Timm <BTimm at Interelate.com> on 12/07/2000 12:14:50 PM Please respond to tclug-list at lists.real-time.com To: "'tclug-list at lists.real-time.com'" <tclug-list at lists.real-time.com> cc: (bcc: JON STIGNANI/spps) Subject: RE: [TCLUG] ATX case hardware problem (need parts) Skip the Duct tape, and use hot glue sticks, You can cut them to any length you need and even use a small screw to secure them...... Best of luck.... Brad Timm -----Original Message----- From: Yaron [mailto:jethro at freakzilla.com] Sent: Thursday, December 07, 2000 12:11 PM To: tclug-list at lists.real-time.com Subject: Re: [TCLUG] ATX case hardware problem (need parts) Hi, On Thu, 7 Dec 2000, Bill Layer wrote: > Does anyone know where I can get enough of these standoffs to mount the > board? maybe from another builder that had extras? A) ACME or ABC Electronics. B) Duct Tape and toothpicks. -Yaron -- _______________________________________________ tclug-list mailing list tclug-list at lists.real-time.com https://mailman.real-time.com/mailman/listinfo/tclug-list _______________________________________________ tclug-list mailing list tclug-list at lists.real-time.com https://mailman.real-time.com/mailman/listinfo/tclug-list